Need Help?

How To Replace A Tire or Tube On An Evolve GT Board

In this How To video we will show you how to replace a tire on your Evolve Carbon GT or Evolve Bamboo GT. This applies to any of the all terrain tires.

We start by removing the wheel from the board, then deflating the tire and removing the hub before taking out the inner tube. Then reinstall the inner tube in the new tire, replace the hub and attach it back to the board.

Please note......Evolve Skateboards are not responsible for mishandling or incorrect uninstallation or installation caused by the customer.

How to adjust Your Evolve Skateboards Super carve Truck

In this how to video we will show you how to adjust your Super Carve truck on your Evolve Skateboard.

Your Evolve Skateboard trucks can be finely tuned to your riding style easily by either tightening or loosening the kingpin nuts. You can also adjust the ride by customising the bushings if you are wanting a different ride and feel to the board. If you like to ride FAST, then tighten your trucks and/or install harder bushings, if you like a more surfy carvy ride then loosen your trucks. A good tip is also to carry your skate tool and adjust as you ride to really dial them in!! Happy and safe riding :)

How To Replace A Motor

In this How To video we will show you how to replace a motor on your Evolve Carbon GT or Evolve Bamboo GT.

This is assuming you have properly diagnosed a motor fault. If you are not sure how to do that check out this video: https://youtu.be/c3uWddE614I

If you have a Bamboo GT and want to see how to remove the casing, have a look at this video: https://youtu.be/pkJfhjVHpyA?t=3m36s

Please note......Evolve Skateboards are not responsible for mishandling or incorrect uninstallation or installation caused by the customer.

How To Fix Clicking Bearings

In this How To video we will show you how to fix any clicking noises in your All Terrain wheels.

As your board wears in, things can start to move and loosen up which may create extra noise. A common noise may be the bearing moving a very small amount within the wheel hub creating a clicking sound. This is easily fixed by using some Lithium Grease in the bearing seat. The lithium grease can also be used in bushings and pivot cups in your Super carve truck.....then she'll ride like a Ninja!

Please note......Evolve Skateboards are not responsible for mishandling or incorrect uninstallation or installation caused by the customer.

How To Diagnose A Motor Problem

In this How To video we will show you how to diagnose a faulty motor / motor problem on your Evolve Carbon GT or Evolve Bamboo GT.

The main thing we need to do is isolate whether the fault is in the motor itself or the motor controller. We do this by removing the battery case and swapping over the motor connectors.

Please note......Evolve Skateboards are not responsible for mishandling or incorrect uninstallation or installation caused by the customer.

How To Replace Motor Controller

In this How To video we will show you how to replace a motor controller on your Evolve Carbon GT or Evolve Bamboo GT.

Please note......Evolve Skateboards are not responsible for mishandling or incorrect uninstallation or installation caused by the customer.

If you have a Bamboo GT and want to see how to remove the casing, have a look at this video: https://youtu.be/pkJfhjVHpyA?t=3m36s

How To Replace A Battery

In this How To video we will show you how to replace a battery on your Evolve Carbon GT or Evolve Bamboo GT.

Please note......Evolve Skateboards are not responsible for mishandling or incorrect uninstallation or installation caused by the customer.